Rated voltage: 12V
Rated current: ≤5A
Continuous working time: ≤30min
Output air pressure: 150PSI
Air flow: ≥30L/min
Noise: 80dB
Cable length: 3M
Portable Inflatable Pump
22-cylinder motor more efficient
22-cylinder Movement Drive50% Faster With air Charging
The pure copper motor drives the alloy die-casting cylinder to move at high speed, outputting surging airflow, filling theR16 zero-pressure tyre in just 6 minutes.
Cigarette lighter power supply
Plug in the cigarette lighter to use, the cable length is 3M to meet the whole car 4 tires inflatable.
Product Comparison
22mm cylinder block, powerful power ,output pressure up to 150psi
Chip upgrade, tire pressure accuracy and temperature control ability increased by more than 45%
Automatically stops when tires are full of air, no monitoring required
One-touch pre-set inflation, stops when full. Prevents over-inflation and mis-inflation, eliminating potential safety hazards.
Note :Due to the real-time tire pressure display will have 1-2psi error, the preset tire pressure should be higher than the actual tire pressure by more than 2psi, otherwise it will not be able to inflate correctly.
Tire pressure reference press
Cars :2.2-2.8bar
Motorcycle :1.8-2.8bar
Bicycle :30-90psi
Balls :7-9psi
Inflate speed test data show
The test data comes from Carsun laboratory, there is 1-2psi error, subject to the actual product use data.
The LED Tire Pressure Digital Display is accurate to 0.05bar
High precision air pressure sensor, real-time detection of tire pressure, away from the risk of low tire pressure.
3 Meter Long Power Cord
3-meter extended power cord included, faster inflation through 12V/8.5A car power socket.
12 Anti-cell IC Protection Continuous
inflation Without Overheating Independent battery protection plate to protect the battery and motor health.
lt's Easy to Pump Up Your Tyres at Night With a Light
Comes with an emergency light that doubles as a flashlight in a pinch and can also be used to pump up tires at night.
Detailed Showcase
1,Copper air nozzle connector :Not easy to be deformed by stepping on it
2,Heat dissipation design :Body design heat dissipation hole, full heat dissipation, protect the pump ,extend the service life
3,Non-slip foot mat :Non-slip foot mat design, stand firmly when inflated
4,Insulated housings High temperature :resistant materials
Usage Steps
1.Start the car
2.Plug the power cord into the cigarette lighter
3.Connect the gas tube to the valve
4.Set tire pressure
5.Start switch
6. Automatically stops when finished
Product Parameter
- Product name: Tire lnflator
- Size:20*6.5*5.8cm
- Cylinder Specitications:22mm
- Line Length:3m/118.11in
- Out Air Pressure:150PSI
- Rate Voltage:12V
- Continuous Working Time :≤30min
- Rate Current:<8.5V
- Noise:80db
Product List:
T3012 Inflatable*1
Instruction manual *1
Storage bag*1
Air Nozzle*3